Bearing Stuck in no.9

[Alex H.]

I have 2 no.9s and the bearings are absolutely stck. I used the freezer trick, I tried different types of pliers and the bearing and axles are still stuck.Do you have any advice for me?

[ffoegoni]

If you have some thin lube, put it in between the bearing and bearing seat.
Let it sit for a couple minutes and it should come off.
hope this helps.

[epicfish]

Try useing a different kind of pliers. Use the kind with a hole in it, open them, and put the bearing right in the whole. Close the pliers, squezze with some pressure, and twist the pliers while pulling a little. It should come out, just keep trying for a few momments, but it shouldn't take long. for the axle, just use the reular part of the plier, but a lot of pressure so it doesn't fall off, and twist the axle counterclockwise. I do this with my yoyo's, and i hope it works for you too!

[Paolo B]

Get a drill bit the same size of the inner hole in the bearing. slip it in there and wiggle. Works like a charm.