Spike Stacks. These fit over the post of YYF hubstacked yoyos. An alternative to using nubs when you want to take the bearing/o-ring/stack off of your YYF hubstacked yoyo. Long Spacks are shown. They stick out slightly past the rim. I also offer them in a shorter version that fits under the rim. $8 / Pair includes shipping in the USA.
Big Deal Ricestacks! Available in translucent clear only. $6 for a set of 2 Ricestacks. Does NOT include the c-clips. NEW! NEW! NEW!
YOYOS
I have several translucent blue Freehand Zeros available to be modded your way.
You can get them silicone recessed or pad recessed. Price INCLUDES a Terrapin X center cut bearing. Shmoove rings can be cut into it for you. Rubber weight rings that fit under the caps are also available. Satin (regular or spiral satin) available at no additional charge. $28 for silicone recessed, $30 for pad recessed. Reshapes available at additional cost.
I also have 6 clear FHZs available. Price INCLUDES a Terrapin X center cut bearing. $33 for silicone recessed $35 for pad recessed. Could also do shmooves, satin (regular or spiral) and rubber weight rings at no additional charge. Would come with the 3 Duncan counterweights that come in the retail package.
Born Crucial large bearing option available for $7 additional. This option would come with a large, flat, cleaned bearing.
Set of FHZ rubber weight rings. These fit under the stock caps and add about 6.6 grams for the set. $3 / set shipped
Of course I also offer modding services. Here are a few examples of what can be done. If you have a specific mod in mind, PM me. I'd be glad to talk about different options!
I can offer ano stripping/polishing. I use chemicals, so there is less chance of introducing any vibe issues than stripping with sandpaper.
SPR
Reshapes. All 3 of these started out as FHZs.
Weight rings
Reshaped FHZ with wiped caps
"Ended" Eetsit
"Ended" Bape
Spiral satin
Stripped axle rethreading. This was a stripped out GM2 that I rethreaded to 8-32 threads.
Polishing.
Menehune modded to accept 'D' size bearing and Duncan spacers (no Buzzon SPR)
Chopped Pyro, Chopped Alph
'Ended' Fluchs (silicone recessed and shmoove rings added). Also cut the original bearing seat out and put a modified Born Crucial SPR in to update the bearing seat to more modern standards. Had to change axle threads to 8-32 to facilitate the bearing seat change.
Bape with updated bearing seat. Interchangable small bearing / large bearing spacers
Peak homemade hub mod / Born Crucial SPR
Polished Dingo with custom axle inserts that also serve as hubstck posts and custom Ricestacks (much longer than stock).
Gung Fu SPR mod and axle size reduction (so the axle will go through the SPR)
Scratch made hub replacement for a European 888. The bearing seat and hubstack was completely bent, so I had to replace the hub.
Large bearing FHZ with custom aluminum hub that doubles as a hubstack. Sidecaps fixed to the hubstacks so that you can grab the sidecaps while the yoyo is spinning!
Of course regular old silicone / pad recesses, shmoove rings, etc are no problem. Shoot me a PM or email me at ricerocket.at.bellsouth.net any time!
« Last Edit: November 09, 2010, 09:47:33 PM by Ricerocket »
HI CHRIS, ive been trying to get hold of you but you dont seem to be about lately, plz plz plz will you stack my campfire for me! i promise then, if its not stacked i wont buy it i could do with a loadsa new stack sets ordering too if you have any in? any pearl cws and bigdeal staks left too? LOL I WANA PEEK IN YOUR DICE DRAWER
Logged
