(NYT) nickel your throw UPDATE : peak , Torrent , campfire , project , marmot ++

[BGskills]

Hi

I appreciate all comments and opinions and I was not upset at all  

And as for my opinion regarding the release of nickel plated run  by a  company that has released already a nickel addition depends ! If the company that has deliberately released an addition of a Yoyo and stated it's a special run and have charged extra for it's exclusivity then they turn around and say ok we are going to release the same Yoyo on another nickel addition run  it will be rather trickery regardig the first addition that was released. It will be depretiating there own exclusivity by making the customers think that the first run of the nickel addition was a scam to get the extra bucks stating that this is exclusive limited number ect ect . It will be good for people who missed out on the first run however i think they will lose favor of people with current original nickel additions who purchased them first.

Let me state this is irrelevant to the fact that I provide the nickel service so don't think I'm opinionating on my behalf because the finish I provide is different to the manufactures.

So I'm just stating the obvious and I think that other people will agree . However if the company releases a new range that doesn't have nickel run then that's a different argument. 

Regards 
Ben 

[dcs937]

This is so awesome. I will be sending you a PM if you are willing to do my gnarwhal for me. As for all these haters who bought nickel plated yoyos and are crying because you will hurt the value of their precious special edition Dietz or 54....wow. I have a wooly markmont and I'm totally cool with this nickel plating clyw marmots. This is helping the yoyo community and moving it forward. Here's a story.

I bought the Jones Beach AF1 Nike's. Only 516 were made. Everyone loved them so much Nike went out and make 10,000 pairs and they were being sold for $100 in Models. Triple what I payed and killed the value. I know that I got the OG pair so that keeps me a little happy. Of course I was a little upset when this quick strike happened but now more people get to enjoy the shoe. I also know mine are the original.

I think its very obvious there is nothing wrong with this service. If you wanted to sell the yoyo in the bst it would have higher value as a special edition most likely anyway. Stop complaining and let us enjoy a different type of nickel plating on yoyos that companys would probably never end up making. I bet you guys would like to get some down the road.

If you keep getting hackled my best advice would be to get "permission" from One Drop and VsNYYC sp? since I think those are the only companies that do it. Also I can't see how in any way they would say no as they are very respected companies from what I hear.

[Swatnoodle]

This is so awesome. I will be sending you a PM if you are willing to do my gnarwhal for me. As for all these haters who bought nickel plated yoyos and are crying because you will hurt the value of their precious special edition Dietz or 54....wow. I have a wooly markmont and I'm totally cool with this nickel plating clyw marmots. This is helping the yoyo community and moving it forward. Here's a story.

I bought the Jones Beach AF1 Nike's. Only 516 were made. Everyone loved them so much Nike went out and make 10,000 pairs and they were being sold for $100 in Models. Triple what I payed and killed the value. I know that I got the OG pair so that keeps me a little happy. Of course I was a little upset when this quick strike happened but now more people get to enjoy the shoe. I also know mine are the original.

I think its very obvious there is nothing wrong with this service. If you wanted to sell the yoyo in the bst it would have higher value as a special edition most likely anyway. Stop complaining and let us enjoy a different type of nickel plating on yoyos that companys would probably never end up making. I bet you guys would like to get some down the road.

If you keep getting hackled my best advice would be to get "permission" from One Drop and VsNYYC sp? since I think those are the only companies that do it. Also I can't see how in any way they would say no as they are very respected companies from what I hear.

Just thought I should point out that the wooly marmot and wooly markmont have different specs and have a noticeable difference in look

[dcs937]

Darn I had a feeling someone was going to point that out... Yea they are but I actually like the clyw better...

[BGskills]

WHAT YOU HAVE ALL BEEN WAITING FOR !!!!

xela'a amazin x3 yoyos nickel edition test run and more ,

heres my edition nickel throws like never seen before !! i think it answers allot of question asked!

enjoy

kind regards
BEn

  Before james throws

before x3 yoys from xela

now here are after





x3 test run nickel tastic



the dark area is just little bit of polish near the bearing seat

close up


the dark parts on the yoy is just some polish that i havent rubbed off

any questions please ask

thanks

[JoeBadass]

Awesome job!

[IanPkmnYo]

Dat Steamroller 

[Sideswipe]

So... much.... shiney....

[BGskills]

YES that was a streamroller from xela himself test run

and i did a few of them very shiny to prove that it can be done and my marmot was redone again as i wnted some more shine on it after i did the others  

also take into NOte yoyos that are raw can come out even more shiny ! and easyer for me to work with ! i blasted these and still this shine is possible

im working on the 'TERMINATOR' finish and when that is done and perfected it will be one to watch out for, as for these BG nickel additions they are nickel like you havent seen before

thanks

Ben

[yoyospirit]

HOLY CRAP!! Those are AWESOME!!!  It looks like polished aluminum!!

[NKessler]

That's exactly what I thought!  With a bit of elbow grease they come out looking perfect!

Great job.  Expect to be doing a few yoyos for me in the near future!

[BGskills]

HOLY CRAP!! Those are AWESOME!!!  It looks like polished aluminum!!

thanks , but they are far from aluminum the feel and tint of it is amazing (imo)  ,in person its very easly noticable and different.
looks like its been diped in LIquid platunim and i was soo happy with them i redid my marmot to have more of a BLING

thanks for all the comments people keep them coming

kind regards

Ben

[kyo]

Certainly a lot better, but I can still see what appear to be imperfections.. so not perfect, but still very nice.

How thick is the buildup on these?

Kyle

[BGskills]

Certainly a lot better, but I can still see what appear to be imperfections.. so not perfect, but still very nice.

How thick is the buildup on these?

Kyle

NO imperfections here Kyle sorry to dissapoint your negative opinions. it even covered up most of  the scratches and scuffs ( maybe thats what you think are imperfections ) ( its a plate finish not magic )  thats as good as it gets and this nickel is by far the best and shiniest i have seen on any yoyo ( fact )

thanks

ps. your little slogan sums you up

regards
BEn

[kyo]

like I said, it's very nice.

You also didn't answer my question...

Kyle

[yoyochucker]

Sounds like someones just being a negative nancy!

[BGskills]

Sounds like someones just being a negative nancy!

LOL

kyle  usually from .0008 to .0012 but can go thicker but there is no need depends on what surface your working with too 

[The Joshinator]

Wow. Can't wait to see how those nickel coatings age with time and play!

[yoyophone]

The only problem I see is how can people see the difference between a special edition nickel plated P2 by onedrop and your nickel plating?

[yoyospirit]

The only problem I see is how can people see the difference between a special edition nickel plated P2 by onedrop and your nickel plating?

Let's put it like this, his nickel plating is better.