Re: Modding service!!! New mods on page 4!!!

[yoyospirit]

Alright, for a while I wanted to offer a modding service, but I felt that I hadn't gotten enough practice.  Now, I feel I can.  So the types of mods I can do are (Can't recess metals.  Sorry) :

-Silicone recesses Pad Recesses, Schmoove rings-5$ both sides, 3$ one side.  Goes for plastic yoyos.  Duncans, Yoyojams (If you don't mind there being a hole on the nipple) Add a dollar for schmoove rings
-Reshapes, highwalls Reshapes are mainly flat rims.  5$ for highwall or flatrim..
-Polish and satin- Metal or plastic.  Not a mirror polish on metals but close. 8$ for a polish, 4$ for a satin, extra 6$ to strip off the anodize.   Plastic satins/polishes are only done  if you have chosen any of the other services.

Also, add 5$ for priority shipping with tracking number.  Pics will be up soon!!  the easiest way to contact me is through a pm.  If sent from 6am to 2:30 pm, you probably won't get a reply until after 3:30. (School sucks)

Edit: Pics up!!!
Link: http://www.yoyonation.com/talk/index.php/topic,99611.0.html

[yoking]

Nice!  I'd recommend finding a way to clamp w/o needing to drill a hole through the YYJ's in time

[yoyospirit]

Yeah but I do my recesses on a drill so there's no other way.  And thanks!  That means a lot coming from you!

[yoking]

wow really? that's easily the best drill recess I've ever seen. Sweet!

[yoyospirit]

Thanks.  It takes like an hour to tune it so the yoyo doesn't wobble on the drill.  I have tried to recess my FH2 while the drill had a major wobble, cut right through the bearing seat.

[yoyospirit]

Also do you think the prices are too high?

[yoyospirit]

..

[bannanaman97]

I'll give you a free bump.

[yoyospirit]

Thanks.

[yoyospirit]

Hubstacking for older FH2s, Dragonflys, Proflys, Moquitos with the screws, and Flying Squirrels!!

This is how I hubstack a duncan.


First, start off by cutting the hole where the black plug goes.

Then, make sure it's the size of the bearing.  I make mine a press fit.



Then, you'll end up with this!!!







Video: http://www.flickr.com/photos/59726548@N07/6154158041/

Cutting the hole is 7$.  Please supply your own bearings and spacers.  Send the spacers with the yoyo so I can make sure they stay on the bearing.  Otherwise, they will easily fall off.  Also, I can fit the hubstacks onto the yoyo in 2 different ways.  The way stated above, or the spacers in in the nipple and the bearing is sticking out so you can use YYF Hubstacks or Dicestacks, this way will require the thicker spacers.

[yoyospirit]

Alright, just wondering, is there enough people who want these kind of hubstacks?  It's 17$ if you want me to supply the bearings.  And, the spacers are pretty hard to find in bulk so, if there isn't enough demand, I will take this mod down.

[bannanaman97]

Alright, just wondering, is there enough people who want these kind of hubstacks?  It's 17$ if you want me to supply the bearings.  And, the spacers are pretty hard to find in bulk so, if there isn't enough demand, I will take this mod down.

When i get a FH2 i'll probably have it hubstacked by you, but that's probably a month down the road.

[yoyospirit]

I can only do it on 2007 FH2s.

[bannanaman97]

I can only do it on 2007 FH2s.

Well shoot.

[oldedges]

Nice Clean recess. I'll keep you in mind Nice sili job too. Is that Motorsil?

[yoyospirit]

No.  Just Red Gasket Maker.  And I may be able to hubstack 2010 FHZs.  I'll try when I get home from school.

[yoyospirit]

Update:  YES!!

FH2010s can be hubstacked!!  Pics up!!  This FH2 had a little Acetone damage so that's why the cuts aren't as smooth.

[bannanaman97]

Update:  YES!!

FH2010s can be hubstacked!!  Pics up in a bit!

Well awesome then! Soon i'll have a hubstacked FH2

[yoyospirit]

Pics up!!

[yoyospirit]

Just bumping this thread.  I'm pretty sure if FH2s can be hubstacked, FHZs can too!!