| Shop at YoYoNation.com | Latest YoYoNation News |
|
|
Pages: [1] 
|
 |
|
|
Author
|
Topic: Overtightened a DMII (Read 320 times)
|
PlasticWhip
Trade Count:
(0)
The Nation
|
So, I was yoyoing with my friend's Dark Magic II today and I was going to try 1/2a and I grabbed the yoyo from the wrong side, and it overtightened it. Is there anything I can do? Or do I owe my friend $40? On each side, there is a metal piece (It's what holds the axle in place). On one side, that piece spins when I try and unscrew it. What should I do to hold it still?
|
|
|
|
|
Logged
|
|
|
|
jensen hartford
I am the Nation
Trade Count:
(67)
The Nation
|
It's pretty much broken by now...
|
|
|
|
|
Logged
|
H-spin Lover! Always looking for H-spin and Peaks! PM me if you have a peak especially 28 stories and Hot pink.
|
|
|
yoyospirit
Trade Count:
(5)
The Nation
|
You're pretty much screwed. I would try to slam the side that's spinning out and put a dab of super glue on it and hammer it back in.
|
|
|
|
|
Logged
|
|
|
|
rizki_yoist
"floaty" is undefined and it should be avoided
Trade Count:
(0)
The Nation
-Rizki Hadiaturrasyid-
|
yes it does broken
try yoyospirit's way to fix it, but of course you owe your friend a DMII
|
|
|
|
|
Logged
|
having problem designing or drawing a yoyo CAD? hit me up!
|
|
|
PlasticWhip
Trade Count:
(0)
The Nation
|
You're pretty much screwed. I would try to slam the side that's spinning out and put a dab of super glue on it and hammer it back in.
Which way will it come out? |
|
|
|
|
Logged
|
|
|
|
GunstarHero
Chuck Cescon
Trade Count:
(38)
The Nation
Throw it away
|
When I strip my yoyo's I usually use hot glue or loctite to hold the stripped side in. Do nothing to the good side. I would still replace the DM but this will make it play. If not done properly it may vibe a bit....make sure you keep the axle straight when you affix the axle to the stripped side.
|
|
|
|
|
Logged
|
Boomshakalaka! *high five*
|
|
|
PlasticWhip
Trade Count:
(0)
The Nation
|
When I strip my yoyo's I usually use hot glue or loctite to hold the stripped side in. Do nothing to the good side. I would still replace the DM but this will make it play. If not done properly it may vibe a bit....make sure you keep the axle straight when you affix the axle to the stripped side.
It will play now, it just won't come unscrewed. |
|
|
|
|
Logged
|
|
|
|
fzzyrn
You can call me Leo
Manufacturer
Trade Count:
(65)
The Nation
|
Try pulling slightly outward as you try to unscrew it. If the axle piece is spinning, it may have to be braced before it can be released.
|
|
|
|
|
Logged
|
If you have any questions, feel free to PM me.
|
|
|
|
Pages: [1] 
|
|
|
 |
|
